[
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/8\" FEM ABS Adv",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 1.27,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 40
            },
            {
                "millVersion": "V2",
                "pass_depth": 1.27,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Pro",
                "pass_depth": 1.27,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 1.27,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 1.27,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 40
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                2.5874999999999999,
                0,
                -1
            ],
            [
                3.1699999999999999,
                1.5874999999999999,
                0,
                1
            ],
            [
                3.1699999999999999,
                0,
                0,
                1
            ]
        ],
        "uuid": "{e6fd8bf0-9a61-455e-88a1-eef39ee5d44e}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/16\" FEM ABS",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.23000000000000001,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 600,
                "z_feed_rate": 40
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.23000000000000001,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 600,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.23000000000000001,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 600,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.23000000000000001,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 600,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.23000000000000001,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 600,
                "z_feed_rate": 40
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                2.5874999999999999,
                0,
                -1
            ],
            [
                1.5900000000000001,
                1.5874999999999999,
                0,
                1
            ],
            [
                1.5900000000000001,
                0,
                0,
                1
            ]
        ],
        "uuid": "{45ec51d9-fc7f-4a54-9b25-4e09c351844e}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/16\" FEM ABS Adv",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 1.27,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1270,
                "z_feed_rate": 40
            },
            {
                "millVersion": "V2",
                "pass_depth": 1.27,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1270,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Pro",
                "pass_depth": 1.27,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1270,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 1.27,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1270,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 1.27,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1270,
                "z_feed_rate": 40
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                2.5874999999999999,
                0,
                -1
            ],
            [
                1.5900000000000001,
                1.5874999999999999,
                0,
                1
            ],
            [
                1.5900000000000001,
                0,
                0,
                1
            ]
        ],
        "uuid": "{02a449e3-67fb-4c9c-9e88-f7435ffc144e}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/32\" FEM ABS",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.23000000000000001,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 600,
                "z_feed_rate": 40
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.23000000000000001,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 600,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.23000000000000001,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 600,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.23000000000000001,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 600,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.23000000000000001,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 600,
                "z_feed_rate": 40
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                2.5874999999999999,
                0,
                -1
            ],
            [
                0.79000000000000004,
                1.5874999999999999,
                0,
                1
            ],
            [
                0.79000000000000004,
                0,
                0,
                1
            ]
        ],
        "uuid": "{8aabf141-ac01-46bc-b387-ffbe806c444e}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/32\" FEM ABS Adv",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.51000000000000001,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1000,
                "z_feed_rate": 40
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.51000000000000001,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1000,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.51000000000000001,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1000,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.51000000000000001,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1000,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.51000000000000001,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1000,
                "z_feed_rate": 40
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                2.5874999999999999,
                0,
                -1
            ],
            [
                0.79000000000000004,
                1.5874999999999999,
                0,
                1
            ],
            [
                0.79000000000000004,
                0,
                0,
                1
            ]
        ],
        "uuid": "{c48dcbb4-fa9b-4d54-9a7b-9421e3d7044e}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/64\" FEM ABS",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.23000000000000001,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 600,
                "z_feed_rate": 40
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.23000000000000001,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 600,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.23000000000000001,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 600,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.23000000000000001,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 600,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.23000000000000001,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 600,
                "z_feed_rate": 40
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                2.5874999999999999,
                0,
                -1
            ],
            [
                0.40000000000000002,
                1.5874999999999999,
                0,
                1
            ],
            [
                0.40000000000000002,
                0,
                0,
                1
            ]
        ],
        "uuid": "{7a78ac34-2486-405e-a40c-8b3aa0f5f44e}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/64\" FEM ABS Adv",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.25,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 762,
                "z_feed_rate": 40
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.25,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 762,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.25,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 762,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.25,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 762,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.25,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 762,
                "z_feed_rate": 40
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                2.5874999999999999,
                0,
                -1
            ],
            [
                0.40000000000000002,
                1.5874999999999999,
                0,
                1
            ],
            [
                0.40000000000000002,
                0,
                0,
                1
            ]
        ],
        "uuid": "{f135ed16-3462-40c4-bd0c-80f70199e44e}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Engraving",
        "name": "30º Eng ABS ",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.14999999999999999,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1000,
                "z_feed_rate": 40
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.14999999999999999,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1000,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.14999999999999999,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1000,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.14999999999999999,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1000,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.14999999999999999,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1000,
                "z_feed_rate": 40
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                5.6820473545236156,
                0,
                1
            ],
            [
                0.13,
                0,
                0,
                1
            ]
        ],
        "uuid": "{b54161e5-374e-4102-9f9a-11db3683d44e}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Engraving",
        "name": "30º Eng ABS Adv",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.14999999999999999,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 40
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.14999999999999999,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.14999999999999999,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.14999999999999999,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.14999999999999999,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 40
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                5.6820473545236156,
                0,
                1
            ],
            [
                0.13,
                0,
                0,
                1
            ]
        ],
        "uuid": "{b047a7b3-0bcc-4f66-8cea-ecb59022044e}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Engraving",
        "name": "30º Eng HP ABS ",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.14999999999999999,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1000,
                "z_feed_rate": 40
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.14999999999999999,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1000,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.14999999999999999,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1000,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.14999999999999999,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1000,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.14999999999999999,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1000,
                "z_feed_rate": 40
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                5.7753486247128372,
                0,
                1
            ],
            [
                0.080000000000000002,
                0,
                0,
                1
            ]
        ],
        "uuid": "{b78d27e4-a5be-4f2c-b005-6661b3d0944e}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Engraving",
        "name": "30º Eng HP ABS Adv",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.14999999999999999,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 40
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.14999999999999999,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.14999999999999999,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.14999999999999999,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.14999999999999999,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 40
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                5.7753486247128372,
                0,
                1
            ],
            [
                0.080000000000000002,
                0,
                0,
                1
            ]
        ],
        "uuid": "{a2f0d3af-a286-44dd-ab71-84649097f44e}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Engraving",
        "name": "80º Eng ABS ",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.14999999999999999,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1000,
                "z_feed_rate": 40
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.14999999999999999,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1000,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.14999999999999999,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1000,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.14999999999999999,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1000,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.14999999999999999,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1000,
                "z_feed_rate": 40
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                1.814444844724685,
                0,
                1
            ],
            [
                0.13,
                0,
                0,
                1
            ]
        ],
        "uuid": "{f5ec15b7-ff53-4c75-9e6f-ee1dd798444e}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Engraving",
        "name": "80º Eng ABS Adv",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.14999999999999999,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 40
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.14999999999999999,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.14999999999999999,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.14999999999999999,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.14999999999999999,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 40
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                1.814444844724685,
                0,
                1
            ],
            [
                0.13,
                0,
                0,
                1
            ]
        ],
        "uuid": "{d668575d-9f0d-400b-87c7-ec849c1e044e}"
    }
]