[
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/8\" FEM Foam ",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.5,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.5,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.5,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.5,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.5,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                2.5874999999999999,
                0,
                -1
            ],
            [
                3.1699999999999999,
                1.5874999999999999,
                0,
                1
            ],
            [
                3.1699999999999999,
                0,
                0,
                1
            ]
        ],
        "uuid": "{adebe20a-7189-43fb-a8f9-4c2f24085ccc}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/8\" FEM Foam Adv",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 3,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            },
            {
                "millVersion": "V2",
                "pass_depth": 3,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            },
            {
                "millVersion": "Pro",
                "pass_depth": 3,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 3,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 3,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                2.5874999999999999,
                0,
                -1
            ],
            [
                3.1699999999999999,
                1.5874999999999999,
                0,
                1
            ],
            [
                3.1699999999999999,
                0,
                0,
                1
            ]
        ],
        "uuid": "{e6fd8bf0-9161-455e-88a1-eef39ee5ccc3}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/16\" FEM Foam",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.34000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.34000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.34000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.34000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.34000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                2.5874999999999999,
                0,
                -1
            ],
            [
                1.5900000000000001,
                1.5874999999999999,
                0,
                1
            ],
            [
                1.5900000000000001,
                0,
                0,
                1
            ]
        ],
        "uuid": "{45ec51d9-fc7f-4a14-9b25-4e09c3518ccc}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/16\" FEM Foam Adv",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 1.5,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            },
            {
                "millVersion": "V2",
                "pass_depth": 1.5,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            },
            {
                "millVersion": "Pro",
                "pass_depth": 1.5,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 1.5,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 1.5,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                2.5874999999999999,
                0,
                -1
            ],
            [
                1.5900000000000001,
                1.5874999999999999,
                0,
                1
            ],
            [
                1.5900000000000001,
                0,
                0,
                1
            ]
        ],
        "uuid": "{02a449e3-67fb-4c1c-9e88-f7435ffc1ccc}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/32\" FEM Foam",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.34000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.34000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.34000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.34000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.34000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                2.5874999999999999,
                0,
                -1
            ],
            [
                0.79000000000000004,
                1.5874999999999999,
                0,
                1
            ],
            [
                0.79000000000000004,
                0,
                0,
                1
            ]
        ],
        "uuid": "{8aabf141-ac11-46bc-b387-ffbe806c4ccc}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/32\" FEM Foam Adv",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 1.5,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            },
            {
                "millVersion": "V2",
                "pass_depth": 1.5,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            },
            {
                "millVersion": "Pro",
                "pass_depth": 1.5,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 1.5,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 1.5,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                2.5874999999999999,
                0,
                -1
            ],
            [
                0.79000000000000004,
                1.5874999999999999,
                0,
                1
            ],
            [
                0.79000000000000004,
                0,
                0,
                1
            ]
        ],
        "uuid": "{c48dcbb4-fa9b-4154-9a7b-9421e3d70ccc}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/64\" FEM Foam",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.11,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.11,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.11,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.11,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.11,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                2.5874999999999999,
                0,
                -1
            ],
            [
                0.40000000000000002,
                1.5874999999999999,
                0,
                1
            ],
            [
                0.40000000000000002,
                0,
                0,
                1
            ]
        ],
        "uuid": "{7a78ac34-1486-405e-a40c-8b3aa0f5fccc}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/64\" FEM Foam Adv",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.25,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.25,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.25,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.25,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.25,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                2.5874999999999999,
                0,
                -1
            ],
            [
                0.40000000000000002,
                1.5874999999999999,
                0,
                1
            ],
            [
                0.40000000000000002,
                0,
                0,
                1
            ]
        ],
        "uuid": "{f135ed16-3412-40c4-bd0c-80f70199eccc}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/100\" FEM Foam",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                2.5874999999999999,
                0,
                -1
            ],
            [
                0.25,
                1.5874999999999999,
                0,
                1
            ],
            [
                0.25,
                0,
                0,
                1
            ]
        ],
        "uuid": "{a9f8d201-de7a-4f13-9ef8-dec198bfa119}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/100\" FEM Foam ADV",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.13,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.13,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.13,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.13,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.13,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                2.5874999999999999,
                0,
                -1
            ],
            [
                0.25,
                1.5874999999999999,
                0,
                1
            ],
            [
                0.25,
                0,
                0,
                1
            ]
        ],
        "uuid": "{a2865bd1-513b-4826-a149-8bcae8a16ba3}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Engraving",
        "name": "30º Eng Foam ",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                5.6820473545236156,
                0,
                1
            ],
            [
                0.13,
                0,
                0,
                1
            ]
        ],
        "uuid": "{b54111e5-374e-4202-9f9a-11db3683dccc}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Engraving",
        "name": "30º Eng Foam Adv",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                5.6820473545236156,
                0,
                1
            ],
            [
                0.13,
                0,
                0,
                1
            ]
        ],
        "uuid": "{b047a7b3-01cc-4f66-8cea-ecb590220ccc}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Engraving",
        "name": "30º Eng HP Foam ",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                5.7753486247128372,
                0,
                1
            ],
            [
                0.080000000000000002,
                0,
                0,
                1
            ]
        ],
        "uuid": "{b78d27e4-a51e-4f2c-b005-6661b3d09ccc}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Engraving",
        "name": "30º Eng HP Foam Adv",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                5.7753486247128372,
                0,
                1
            ],
            [
                0.080000000000000002,
                0,
                0,
                1
            ]
        ],
        "uuid": "{a2f0d3af-a216-44dd-ab71-84649097fccc}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Engraving",
        "name": "80º Eng Foam ",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 800,
                "z_feed_rate": 40
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                1.814444844724685,
                0,
                1
            ],
            [
                0.13,
                0,
                0,
                1
            ]
        ],
        "uuid": "{f5ec15b7-ff13-4c75-9e6f-ee1dd7984ccc}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Engraving",
        "name": "80º Eng Foam Adv",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 500
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                1.814444844724685,
                0,
                1
            ],
            [
                0.13,
                0,
                0,
                1
            ]
        ],
        "uuid": "{d668575d-9f0d-401b-87c7-ec849c1e0ccc}"
    }
]