[
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/8in Flat End Mill Stock",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.5,
                "spindle_speed": 12000,
                "stepover": 0.5,
                "xy_feed_rate": 1200,
                "z_feed_rate": 381
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.5,
                "spindle_speed": 16500,
                "stepover": 0.5,
                "xy_feed_rate": 1500,
                "z_feed_rate": 381
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.5,
                "spindle_speed": 25000,
                "stepover": 0.5,
                "xy_feed_rate": 1650,
                "z_feed_rate": 381
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.5,
                "spindle_speed": 25000,
                "stepover": 0.5,
                "xy_feed_rate": 1650,
                "z_feed_rate": 381
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.5,
                "spindle_speed": 25000,
                "stepover": 0.5,
                "xy_feed_rate": 1650,
                "z_feed_rate": 381
            }
        ],
        "profile": [
            [
                3.175,
                36.5,
                0,
                0
            ],
            [
                3.175,
                2.5875,
                0,
                -1
            ],
            [
                3.17,
                1.5875,
                0,
                1
            ],
            [
                3.17,
                0,
                0,
                1
            ]
        ],
        "uuid": "{14d4697b-fecb-438b-8620-0becedd17b7e}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/16in Flat End Mill Stock",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 1,
                "spindle_speed": 16500,
                "stepover": 0.5,
                "xy_feed_rate": 1650,
                "z_feed_rate": 381
            },
            {
                "millVersion": "V2",
                "pass_depth": 1,
                "spindle_speed": 16500,
                "stepover": 0.5,
                "xy_feed_rate": 1500,
                "z_feed_rate": 381
            },
            {
                "millVersion": "Pro",
                "pass_depth": 1,
                "spindle_speed": 25000,
                "stepover": 0.5,
                "xy_feed_rate": 1650,
                "z_feed_rate": 381
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 1,
                "spindle_speed": 25000,
                "stepover": 0.5,
                "xy_feed_rate": 1650,
                "z_feed_rate": 381
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 1,
                "spindle_speed": 25000,
                "stepover": 0.5,
                "xy_feed_rate": 1650,
                "z_feed_rate": 381
            }
        ],
        "profile": [
            [
                3.175,
                36.5,
                0,
                0
            ],
            [
                3.175,
                2.5875,
                0,
                -1
            ],
            [
                1.59,
                1.5875,
                0,
                1
            ],
            [
                1.59,
                0,
                0,
                1
            ]
        ],
        "uuid": "{0a972ee7-b1f6-4012-ad8e-fba49aea83d9}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/32in Flat End Mill Stock",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.5,
                "spindle_speed": 25000,
                "stepover": 0.5,
                "xy_feed_rate": 1100,
                "z_feed_rate": 381
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.5,
                "spindle_speed": 1650,
                "stepover": 0.5,
                "xy_feed_rate": 1100,
                "z_feed_rate": 381
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.5,
                "spindle_speed": 25000,
                "stepover": 0.5,
                "xy_feed_rate": 1100,
                "z_feed_rate": 381
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.5,
                "spindle_speed": 25000,
                "stepover": 0.5,
                "xy_feed_rate": 1100,
                "z_feed_rate": 381
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.5,
                "spindle_speed": 25000,
                "stepover": 0.5,
                "xy_feed_rate": 1100,
                "z_feed_rate": 381
            }
        ],
        "profile": [
            [
                3.175,
                36.5,
                0,
                0
            ],
            [
                3.175,
                2.5875,
                0,
                -1
            ],
            [
                0.79,
                1.5875,
                0,
                1
            ],
            [
                0.79,
                0,
                0,
                1
            ]
        ],
        "uuid": "{1e148109-b020-43a1-b748-a407dec8d127}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/64in Flat End Mill Stock",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.4,
                "spindle_speed": 25000,
                "stepover": 0.5,
                "xy_feed_rate": 688,
                "z_feed_rate": 280
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.4,
                "spindle_speed": 1650,
                "stepover": 0.5,
                "xy_feed_rate": 381,
                "z_feed_rate": 280
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.4,
                "spindle_speed": 25000,
                "stepover": 0.5,
                "xy_feed_rate": 688,
                "z_feed_rate": 280
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.4,
                "spindle_speed": 25000,
                "stepover": 0.5,
                "xy_feed_rate": 688,
                "z_feed_rate": 280
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.4,
                "spindle_speed": 25000,
                "stepover": 0.5,
                "xy_feed_rate": 688,
                "z_feed_rate": 280
            }
        ],
        "profile": [
            [
                3.175,
                36.5,
                0,
                0
            ],
            [
                3.175,
                2.5875,
                0,
                -1
            ],
            [
                0.39,
                1.5875,
                0,
                1
            ],
            [
                0.39,
                0,
                0,
                1
            ]
        ],
        "uuid": "{137f3666-b5fe-41bf-b398-1b9765831bae}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/100in Flat End Mill Stock",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.05,
                "spindle_speed": 16500,
                "stepover": 0.15,
                "xy_feed_rate": 203,
                "z_feed_rate": 127
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.05,
                "spindle_speed": 16500,
                "stepover": 0.15,
                "xy_feed_rate": 203,
                "z_feed_rate": 127
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.05,
                "spindle_speed": 16500,
                "stepover": 0.15,
                "xy_feed_rate": 203,
                "z_feed_rate": 127
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.05,
                "spindle_speed": 16500,
                "stepover": 0.15,
                "xy_feed_rate": 203,
                "z_feed_rate": 127
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.05,
                "spindle_speed": 16500,
                "stepover": 0.15,
                "xy_feed_rate": 203,
                "z_feed_rate": 127
            }
        ],
        "profile": [
            [
                3.175,
                36.5,
                0,
                0
            ],
            [
                3.175,
                2.5875,
                0,
                -1
            ],
            [
                0.25,
                1.5875,
                0,
                1
            ],
            [
                0.25,
                0,
                0,
                1
            ]
        ],
        "uuid": "{09e8a050-c2c2-4e3d-838b-5b4e12675a89}"
    },
    {
        "conductive": "yes",
        "flutes": "0",
        "group": "Engraving",
        "name": "Metal Engraving Bit 0.005in Stock",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.153,
                "spindle_speed": 16500,
                "stepover": 0.5,
                "xy_feed_rate": 350,
                "z_feed_rate": 200
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.153,
                "spindle_speed": 16500,
                "stepover": 0.5,
                "xy_feed_rate": 350,
                "z_feed_rate": 200
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.153,
                "spindle_speed": 16500,
                "stepover": 0.5,
                "xy_feed_rate": 350,
                "z_feed_rate": 200
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.153,
                "spindle_speed": 16500,
                "stepover": 0.5,
                "xy_feed_rate": 350,
                "z_feed_rate": 200
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.153,
                "spindle_speed": 16500,
                "stepover": 0.5,
                "xy_feed_rate": 350,
                "z_feed_rate": 200
            }
        ],
        "profile": [
            [
                3.175,
                36.5,
                0,
                0
            ],
            [
                3.175,
                1.814444844724685,
                0,
                1
            ],
            [
                0.13,
                0,
                0,
                1
            ]
        ],
        "uuid": "{d96721b0-3e48-4151-a085-506b55a3e8d7}"
    },
    {
        "conductive": "yes",
        "flutes": "0",
        "group": "Engraving",
        "name": "PCB Engraving Bit 0.003in Stock",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.153,
                "spindle_speed": 16500,
                "stepover": 0.5,
                "xy_feed_rate": 350,
                "z_feed_rate": 200
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.153,
                "spindle_speed": 16500,
                "stepover": 0.5,
                "xy_feed_rate": 350,
                "z_feed_rate": 200
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.153,
                "spindle_speed": 16500,
                "stepover": 0.5,
                "xy_feed_rate": 350,
                "z_feed_rate": 200
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.153,
                "spindle_speed": 16500,
                "stepover": 0.5,
                "xy_feed_rate": 350,
                "z_feed_rate": 200
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.153,
                "spindle_speed": 16500,
                "stepover": 0.5,
                "xy_feed_rate": 350,
                "z_feed_rate": 200
            }
        ],
        "profile": [
            [
                3.175,
                36.5,
                0,
                0
            ],
            [
                3.175,
                5.794008878750682,
                0,
                1
            ],
            [
                0.07,
                0,
                0,
                1
            ]
        ],
        "uuid": "{152e0f9f-eaa8-48ee-b2b6-b543ef5464dc}"
    },
    {
        "conductive": "yes",
        "flutes": "0",
        "group": "Engraving",
        "name": "PCB Engraving Bit 0.005in Stock",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.25,
                "spindle_speed": 16500,
                "stepover": 0.5,
                "xy_feed_rate": 350,
                "z_feed_rate": 200
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.25,
                "spindle_speed": 16500,
                "stepover": 0.5,
                "xy_feed_rate": 350,
                "z_feed_rate": 200
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.25,
                "spindle_speed": 16500,
                "stepover": 0.5,
                "xy_feed_rate": 350,
                "z_feed_rate": 200
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.25,
                "spindle_speed": 16500,
                "stepover": 0.5,
                "xy_feed_rate": 350,
                "z_feed_rate": 200
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.25,
                "spindle_speed": 16500,
                "stepover": 0.5,
                "xy_feed_rate": 350,
                "z_feed_rate": 200
            }
        ],
        "profile": [
            [
                3.175,
                36.5,
                0,
                0
            ],
            [
                3.175,
                5.682047354523616,
                0,
                1
            ],
            [
                0.13,
                0,
                0,
                1
            ]
        ],
        "uuid": "{9e3ca73d-8a06-4055-bc59-fa4c73628457}"
    }
]