[
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/8\" FEM Brass ",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.070000000000000007,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 200,
                "z_feed_rate": 16.66
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.070000000000000007,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 200,
                "z_feed_rate": 16.66
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.070000000000000007,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 200,
                "z_feed_rate": 16.66
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.070000000000000007,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 200,
                "z_feed_rate": 16.66
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.070000000000000007,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 200,
                "z_feed_rate": 16.66
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                2.5874999999999999,
                0,
                -1
            ],
            [
                3.1699999999999999,
                1.5874999999999999,
                0,
                1
            ],
            [
                3.1699999999999999,
                0,
                0,
                1
            ]
        ],
        "uuid": "{ade2e20a-7b89-33fb-a8f9-4c2f24085ccc}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/8\" FEM Brass Adv",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.050000000000000003,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 127
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.050000000000000003,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 127
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.050000000000000003,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 127
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.050000000000000003,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 127
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.050000000000000003,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 127
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                2.5874999999999999,
                0,
                -1
            ],
            [
                3.1699999999999999,
                1.5874999999999999,
                0,
                1
            ],
            [
                3.1699999999999999,
                0,
                0,
                1
            ]
        ],
        "uuid": "{00000000-0000-0000-0000-000000000000}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/16\" FEM Brass",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.070000000000000007,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 200,
                "z_feed_rate": 16.66
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.070000000000000007,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 200,
                "z_feed_rate": 16.66
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.070000000000000007,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 200,
                "z_feed_rate": 16.66
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.070000000000000007,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 200,
                "z_feed_rate": 16.66
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.070000000000000007,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 200,
                "z_feed_rate": 16.66
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                2.5874999999999999,
                0,
                -1
            ],
            [
                1.5900000000000001,
                1.5874999999999999,
                0,
                1
            ],
            [
                1.5900000000000001,
                0,
                0,
                1
            ]
        ],
        "uuid": "{45ec52d8-fc7f-4a54-9b25-4e09c3518ccc}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/16\" FEM Brass Adv",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.050000000000000003,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 127
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.050000000000000003,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 127
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.050000000000000003,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 127
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.050000000000000003,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 127
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.050000000000000003,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 127
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                2.5874999999999999,
                0,
                -1
            ],
            [
                1.5900000000000001,
                1.5874999999999999,
                0,
                1
            ],
            [
                1.5900000000000001,
                0,
                0,
                1
            ]
        ],
        "uuid": "{02a44823-67fb-4c9c-9e88-f7435ffc1ccc}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/32\" FEM Brass",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.070000000000000007,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 200,
                "z_feed_rate": 16.66
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.070000000000000007,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 200,
                "z_feed_rate": 16.66
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.070000000000000007,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 200,
                "z_feed_rate": 16.66
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.070000000000000007,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 200,
                "z_feed_rate": 16.66
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.070000000000000007,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 200,
                "z_feed_rate": 16.66
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                2.5874999999999999,
                0,
                -1
            ],
            [
                0.79000000000000004,
                1.5874999999999999,
                0,
                1
            ],
            [
                0.79000000000000004,
                0,
                0,
                1
            ]
        ],
        "uuid": "{8aabf142-a201-46bc-b387-ffbe806c4ccc}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/32\" FEM Brass Adv",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.050000000000000003,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 127
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.050000000000000003,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 127
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.050000000000000003,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 127
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.050000000000000003,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 127
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.050000000000000003,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 127
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                2.5874999999999999,
                0,
                -1
            ],
            [
                0.79000000000000004,
                1.5874999999999999,
                0,
                1
            ],
            [
                0.79000000000000004,
                0,
                0,
                1
            ]
        ],
        "uuid": "{248dcbb4-fa2b-4d54-9a7b-9421e3d70ccc}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/64\" FEM Brass",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.02,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 40,
                "z_feed_rate": 4
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.02,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 40,
                "z_feed_rate": 4
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.02,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 40,
                "z_feed_rate": 4
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.02,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 40,
                "z_feed_rate": 4
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.02,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 40,
                "z_feed_rate": 4
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                2.5874999999999999,
                0,
                -1
            ],
            [
                0.40000000000000002,
                1.5874999999999999,
                0,
                1
            ],
            [
                0.40000000000000002,
                0,
                0,
                1
            ]
        ],
        "uuid": "{7a782c34-2286-405e-a40c-8b3aa0f5fccc}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/64\" FEM Brass Adv",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.02,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 381,
                "z_feed_rate": 25
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.02,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 381,
                "z_feed_rate": 25
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.02,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 381,
                "z_feed_rate": 25
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.02,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 381,
                "z_feed_rate": 25
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.02,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 381,
                "z_feed_rate": 25
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                2.5874999999999999,
                0,
                -1
            ],
            [
                0.40000000000000002,
                1.5874999999999999,
                0,
                1
            ],
            [
                0.40000000000000002,
                0,
                0,
                1
            ]
        ],
        "uuid": "{f135ed16-3463-40c4-bd0c-80270199eccc}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/100\" FEM Brass",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.02,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 40,
                "z_feed_rate": 4
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.02,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 40,
                "z_feed_rate": 4
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.02,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 40,
                "z_feed_rate": 4
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.02,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 40,
                "z_feed_rate": 4
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.02,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 40,
                "z_feed_rate": 4
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                2.5874999999999999,
                0,
                -1
            ],
            [
                0.25,
                1.5874999999999999,
                0,
                1
            ],
            [
                0.25,
                0,
                0,
                1
            ]
        ],
        "uuid": "{a9f8d201-2e7a-4f23-9ef8-dec198bfa119}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/100\" FEM Brass ADV",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.02,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 127,
                "z_feed_rate": 12.5
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.02,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 127,
                "z_feed_rate": 12.5
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.02,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 127,
                "z_feed_rate": 12.5
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.02,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 127,
                "z_feed_rate": 12.5
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.02,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 127,
                "z_feed_rate": 12.5
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                2.5874999999999999,
                0,
                -1
            ],
            [
                0.25,
                1.5874999999999999,
                0,
                1
            ],
            [
                0.25,
                0,
                0,
                1
            ]
        ],
        "uuid": "{a2865bd1-213b-4826-ad49-82cae8a16ba3}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Engraving",
        "name": "30º Eng Brass ",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.070000000000000007,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 200,
                "z_feed_rate": 16.66
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.070000000000000007,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 200,
                "z_feed_rate": 16.66
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.070000000000000007,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 200,
                "z_feed_rate": 16.66
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.070000000000000007,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 200,
                "z_feed_rate": 16.66
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.070000000000000007,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 200,
                "z_feed_rate": 16.66
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                5.6820473545236156,
                0,
                1
            ],
            [
                0.13,
                0,
                0,
                1
            ]
        ],
        "uuid": "{b54161e5-274e-4102-9f9a-12db3683dccc}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Engraving",
        "name": "30º Eng HP Brass ",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.070000000000000007,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 200,
                "z_feed_rate": 16.66
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.070000000000000007,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 200,
                "z_feed_rate": 16.66
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.070000000000000007,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 200,
                "z_feed_rate": 16.66
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.070000000000000007,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 200,
                "z_feed_rate": 16.66
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.070000000000000007,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 200,
                "z_feed_rate": 16.66
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                5.7753486247128372,
                0,
                1
            ],
            [
                0.080000000000000002,
                0,
                0,
                1
            ]
        ],
        "uuid": "{b78d27e4-a5be-422c-2005-6661b3d09ccc}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Engraving",
        "name": "80º Eng Brass ",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.070000000000000007,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 200,
                "z_feed_rate": 16.66
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.070000000000000007,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 200,
                "z_feed_rate": 16.66
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.070000000000000007,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 200,
                "z_feed_rate": 16.66
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.070000000000000007,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 200,
                "z_feed_rate": 16.66
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.070000000000000007,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 200,
                "z_feed_rate": 16.66
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                1.814444844724685,
                0,
                1
            ],
            [
                0.13,
                0,
                0,
                1
            ]
        ],
        "uuid": "{f5ec15b7-f253-4c75-2e6f-ee1dd7984ccc}"
    }
]