[
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/8\" FEM Alum ",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.050000000000000003,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 180,
                "z_feed_rate": 15
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.050000000000000003,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 180,
                "z_feed_rate": 15
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.050000000000000003,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 180,
                "z_feed_rate": 15
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.050000000000000003,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 180,
                "z_feed_rate": 15
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.050000000000000003,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 180,
                "z_feed_rate": 15
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                2.5874999999999999,
                0,
                -1
            ],
            [
                3.1699999999999999,
                1.5874999999999999,
                0,
                1
            ],
            [
                3.1699999999999999,
                0,
                0,
                1
            ]
        ],
        "uuid": "{ade1120a-7b89-43fb-a8f9-4c2f24085ccc}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/8\" FEM Alum Adv",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.050000000000000003,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 127
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.050000000000000003,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 127
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.050000000000000003,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 127
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.050000000000000003,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 127
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.050000000000000003,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 127
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                2.5874999999999999,
                0,
                -1
            ],
            [
                3.1699999999999999,
                1.5874999999999999,
                0,
                1
            ],
            [
                3.1699999999999999,
                0,
                0,
                1
            ]
        ],
        "uuid": "{e6f11bf0-9a61-455e-88a1-eef39ee5ccc3}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/16\" FEM Alum",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 180,
                "z_feed_rate": 15
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 180,
                "z_feed_rate": 15
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 180,
                "z_feed_rate": 15
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 180,
                "z_feed_rate": 15
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 180,
                "z_feed_rate": 15
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                2.5874999999999999,
                0,
                -1
            ],
            [
                1.5900000000000001,
                1.5874999999999999,
                0,
                1
            ],
            [
                1.5900000000000001,
                0,
                0,
                1
            ]
        ],
        "uuid": "{45ec5119-fc7f-4a54-9b25-4e09c3518ccc}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/16\" FEM Alum Adv",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.050000000000000003,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 127
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.050000000000000003,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 127
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.050000000000000003,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 127
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.050000000000000003,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 127
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.050000000000000003,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 127
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                2.5874999999999999,
                0,
                -1
            ],
            [
                1.5900000000000001,
                1.5874999999999999,
                0,
                1
            ],
            [
                1.5900000000000001,
                0,
                0,
                1
            ]
        ],
        "uuid": "{02a411e3-67fb-4c9c-9e88-f7435ffc1ccc}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/32\" FEM Alum",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 180,
                "z_feed_rate": 15
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 180,
                "z_feed_rate": 15
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 180,
                "z_feed_rate": 15
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 180,
                "z_feed_rate": 15
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.080000000000000002,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 180,
                "z_feed_rate": 15
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                2.5874999999999999,
                0,
                -1
            ],
            [
                0.79000000000000004,
                1.5874999999999999,
                0,
                1
            ],
            [
                0.79000000000000004,
                0,
                0,
                1
            ]
        ],
        "uuid": "{8aa11141-ac01-46bc-b387-ffbe806c4ccc}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/32\" FEM Alum Adv",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.050000000000000003,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 127
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.050000000000000003,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 127
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.050000000000000003,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 127
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.050000000000000003,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 127
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.050000000000000003,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 1500,
                "z_feed_rate": 127
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                2.5874999999999999,
                0,
                -1
            ],
            [
                0.79000000000000004,
                1.5874999999999999,
                0,
                1
            ],
            [
                0.79000000000000004,
                0,
                0,
                1
            ]
        ],
        "uuid": "{c4811bb4-fa9b-4d54-9a7b-9421e3d70ccc}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/64\" FEM Alum",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.02,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 36,
                "z_feed_rate": 4
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.02,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 36,
                "z_feed_rate": 4
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.02,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 36,
                "z_feed_rate": 4
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.02,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 36,
                "z_feed_rate": 4
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.02,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 36,
                "z_feed_rate": 4
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                2.5874999999999999,
                0,
                -1
            ],
            [
                0.40000000000000002,
                1.5874999999999999,
                0,
                1
            ],
            [
                0.40000000000000002,
                0,
                0,
                1
            ]
        ],
        "uuid": "{7a711c34-2486-405e-a40c-8b3aa0f5fccc}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/64\" FEM Alum Adv",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.02,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 381,
                "z_feed_rate": 25.399999999999999
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.02,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 381,
                "z_feed_rate": 25.399999999999999
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.02,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 381,
                "z_feed_rate": 25.399999999999999
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.02,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 381,
                "z_feed_rate": 25.399999999999999
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.02,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 381,
                "z_feed_rate": 25.399999999999999
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                2.5874999999999999,
                0,
                -1
            ],
            [
                0.40000000000000002,
                1.5874999999999999,
                0,
                1
            ],
            [
                0.40000000000000002,
                0,
                0,
                1
            ]
        ],
        "uuid": "{f1351116-3462-40c4-bd0c-80f70199eccc}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/100\" FEM Alum",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.02,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 36,
                "z_feed_rate": 4
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.02,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 36,
                "z_feed_rate": 4
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.02,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 36,
                "z_feed_rate": 4
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.02,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 36,
                "z_feed_rate": 4
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.02,
                "spindle_speed": 12000,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 36,
                "z_feed_rate": 4
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                2.5874999999999999,
                0,
                -1
            ],
            [
                0.25,
                1.5874999999999999,
                0,
                1
            ],
            [
                0.25,
                0,
                0,
                1
            ]
        ],
        "uuid": "{a911d201-de7a-4f83-9ef8-dec198bfa119}"
    },
    {
        "conductive": "no",
        "flutes": "0",
        "group": "Endmill",
        "name": "1/100\" FEM Alum ADV",
        "params": [
            {
                "millVersion": "V1",
                "pass_depth": 0.02,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 381,
                "z_feed_rate": 25.399999999999999
            },
            {
                "millVersion": "V2",
                "pass_depth": 0.02,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 381,
                "z_feed_rate": 25.399999999999999
            },
            {
                "millVersion": "Pro",
                "pass_depth": 0.02,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 381,
                "z_feed_rate": 25.399999999999999
            },
            {
                "millVersion": "Bantam",
                "pass_depth": 0.02,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 381,
                "z_feed_rate": 25.399999999999999
            },
            {
                "millVersion": "Bantam_esc",
                "pass_depth": 0.02,
                "spindle_speed": 16400,
                "stepover": 0.45000000000000001,
                "xy_feed_rate": 381,
                "z_feed_rate": 25.399999999999999
            }
        ],
        "profile": [
            [
                3.1749999999999998,
                36.5,
                0,
                0
            ],
            [
                3.1749999999999998,
                2.5874999999999999,
                0,
                -1
            ],
            [
                0.25,
                1.5874999999999999,
                0,
                1
            ],
            [
                0.25,
                0,
                0,
                1
            ]
        ],
        "uuid": "{a2115bd1-513b-4826-ad49-8bcae8a16ba3}"
    }
]