The Othermill V2, released in late 2014, can be identified by its silver top cover and “Othermill V2” on its serial number sticker.
If you have questions about the Othermill Pro’s capabilities or specifications, please don’t hesitate to contact us at support@bantamtools.com.
| Dimensions | |
|---|---|
| Frame Dimensions | 10.25 × 10 × 12.75 in 260 × 254 × 324 mm |
| Overall Dimensions | 12.75 × 12 × 12.875 in 324 × 305 × 327 mm |
| Working Volume (spoilboard removed) | 5.5 × 4.5 × 1.6 in 140 × 114 × 40.6 mm |
| Working Volume (spoilboard installed) | 5.5 × 4.5 × 1.35 in 140 × 114 × 34.3 mm |
| Weight | 16.8 lb 7.62 kg |
| Mechanics | |
| Body | 3/8 in (9.5 mm) HDPE and 6061 aluminum |
| Ways | Case-hardened precision-ground steel |
| Bed | ¼ in (6.4 mm) 6061 aluminum mounting plate |
| XYZ Bearings | Acetal resin sleeve bearings |
| XYZ Motors | Stepper motors with 0.000125 in (0.003175 mm) microstepping |
| Spindle Motor | 1100 Kv brushless DC |
| Max XYZ Traverse Speed | 60 in/min 1,500 mm/min |
| Spindle Speed | 10,500 - 16,400 rpm |
| Accuracy | <0.003’’ per 6’’ linear travel |
| Repeatability | =± 0.001 in |
| Backlash | <0.002” |
| Max Resolution | 0.001 in 25 microns |
| PCB Cut Speed | Up to 60 in/min 1,500 mm/min |
| Electronics | |
| Power Requirements | 100–120 V AC, 4 A 200–240 V AC, 2 A 50/60 Hz |
| Consumption | 150 W |
| Operating Temperature | 40–110 °F 4–43 °C |
| Software | |
| App | Otherplan Otherplan Classic |
| System Requirements | Mac OS X 10.9 or higher Windows 7 or higher 64-bit operating system required Graphics card with OpenGL ES 2.0 support |
| Interface | USB 2.0 |
| File Input | Eagle BRD (.brd) Gerber RS-274X (.gtl and .grb) G-Code (.nc and .tap) SVG (.svg) |
| Features | Free Easy install Intuitive interface Full tech support Automatic tool location Automatic homing/calibration Real-time data feedback while milling 3D multi-axis view of your imported file |
| Tools | |
| Tool Holding | ER-11 collet |
| Largest Recommended Shank Size | 1/8 in 3.5 mm |
| Smallest Recommended End Mill Size | 0.010 in 0.25 mm |
| Materials All materials listed here are merely a sampling of what can be used on the Othermill. Our team is constantly testing new materials. |
|
| Machining Wax | High speed Regular |
| FR-1 Printed Circuit Board (PCB) Blanks | Single-sided Double-sided |
| Wood | Birch plywood Maple |
| Metal | Copper Brass Aluminum, 6061 |
| Plastic | HDPE PVC Acrylic Delrin |
| In the Box | |
| Othermill | Othermill (V2) |
| Power Supply | External |
| Power Cable | IEC Type B |
| USB 2.0 Cable | A-type to B-type |
| Accessory Kit | Wrench, small, for tool changing×1 Wrench, large, for tool changing×1 Collet, ER-11, 1/8"×1 Belts, replacement×5 Othermill alignment jig×1 Screws, M3 x 8 mm, for jig×3 Allen Wrench, 2 mm, for jig×1 End mill, flat, 1/32"×1 End mill, flat, 1/64"×1 |
| “Hello, World!” Kit | FR-1 printed circuit board (PCB) blank, single-sided×3 Resistor, 47 ohm×2 LED, 3 mm, white×2 Coin-cell battery, 3V, CR 2032×1 Coin-cell battery holder×1 Tape, double-sided×1 |
If you have questions about the Othermill Pro’s capabilities or specifications, please don’t hesitate to contact us at support@bantamtools.com.